thermal transition

Experiments on the transition time of Congo red test paper showed that the thermal decomposition time of nano-PVC composite resin was nearly ten times longer than that of traditional PVC resin.

185℃刚果红试纸变色时间试验证明，纳米复合PVC树脂热分解时间比传统产品延长了近10倍。

DSC results showed that the glass transition temperature of COL was 176 ° C, and thermal stability declined slightly comparing with BC. COL/ BC displayed a good thermal stability which could meet the sterilization requirements of biomedical materials at 121 ° C.

DSC结果显示，在176°C条件下出现了胶原的玻璃化转变，与BC相比稍有下降，但仍能满足生物医用材料121°C灭菌的要求，热稳定性能良好。

The thermal hysteresis of the transition is about70K, in agreement with that obtained from the dielectric and pyroelectric measurements.

该相变的热滞约为70K，与介电及热电测量所得结果基本一致。

As a wildly used organism, acetylacetone was prepared mainly by the absorption of ketene and thermal transition.

乙酰丙酮作为一种应用较为广泛的有机物，其制备的工艺多采用乙烯酮吸收和热转化的途径。

Finite element analysis of thermal stress in transition section of coke tower

焦炭塔过渡段区域的热应力有限元分析

Effective temperature has a direct effect on thermal sensation after transition through the analysis.

经过分析发现有效温度对过渡后热感觉变化有直接影响。

Not only these, PMMA/ nano-SiO2 composite materials have also enhanced thermal stability, glass transition temperature increased from 104.85 ℃ to 119.3 ℃, vicat softening temperature increased by 13 ℃.

不仅如此，PMMA/nano-SiO2复合材料的热稳定性也得到增强，玻璃化转变温度由原来的104.85℃升高为119.3℃，维卡软化点也提高了13℃。

The study on its thermal transition behavior indicates that ES-3 LB film has three phase transition processes, occurring near 65, 105 and 140 ℃, respectively.

相转变行为的研究表明，ES-3LB膜有3个相变点，分别在65105和140℃。

The data of DSC and TG show that the copolymers possess excellent thermal performance, glass transition temperature over 300 ℃, thermal weight loss temperature higher than 500 ℃ and superior solubility in conventional organic aprotic polar solvents.

玻璃化转变温度高于300℃，热失重温度高于500℃。同时，聚合物在常用非质子有机极性溶剂中具有优良的溶解性能。

Finally, we get the laminating process about polyimide materials and the excellent properties of polyimide to epoxy laminate such as heat resistance, thermal shock and glass transition temperature ( Tg) are discussed also.

最后，比较了聚酰亚胺层压板和环氧板在耐温性、热冲击、玻璃转化温度等方面的优异性能。

Thermal Transition Behavior for Thermoplastic Polyimide

热塑性聚酰亚胺热转变行为研究

The appearance of thermal transition temperature indicates a change of protein conformation.

，热转变温度的出现标志蛋白质构象发生变化；

The thermal phase transition of polar lipid ( PL) and its 6 main components from embryo of 2 rice varieties were tested by differential scanning calorimetry ( DSC).

用差示扫描量热法测定了两种抗冷性不同的水稻干胚极性脂及其六个主要组分的热致相变。

The iron atoms and replacement atoms were conducted by atom non-concerted thermal activation transition way in the process of growing and nucleation of bainitic ferrite and bainitic carbide.

贝氏体铁素体和贝氏体碳化物形核-长大过程中铁原子和替换原子是以原子非协同热激活跃迁方式进行的。

Structure Characterization and Thermal Transition of PBT/ PET Copolyester

PBT/PET共聚酯的结构表征和热转变

Thermal Transition of Gelatin Microspheres with and Without Glutaraldehyde-Crosslinking

戊二醛交联前后明胶微球热转变研究

An Infrared Spectrographic Study on Thermal Transition of Sepiolite

用红外吸收光谱法研究海泡石的热相变

Thermal transition control of cholesteric liquid crystalline side chain terpoly ( olefin sulphone) s containing 1 HEPTENE moieties

庚烯-1单体单元对胆甾型侧链液晶共聚砜热转变温度的调节

While measuring thermal transition temperature of textile material by differential scanning calorimetry ( DSC), such as melting, crystallization and glass transition temperature, it is discovered that the extrapolated onset temperature and melting temperature deviate to high temperature direction with raising heat-up rate.

用差示扫描量热仪（DSC）测定纺织材料的热转变温度，如熔融温度、结晶温度、玻璃化转变温度时发现：纺织材料的外推起始温度和熔融温度随升温速率增大向高温方向偏移；

Research progress of solid-solid phase transition polymer materials for thermal energy storage was reviewed.

对高分子固-固相转变储能材料的研究进展进行了综述。

In the paper, the experiments and theories were presented to support the mechanism of atom thermal activation transition of bainite transformation.

本论文也对贝氏体转变的原子热激活跃迁机制提供实验和理论支持。

This thesis suggests the model which describes thermal transition in the biological membrance.

本文提出了一个描述生物膜热致相变的统计模型。

The thermal transition behavior and thermal decomposition kinetics of poly ( phenylene sulfide ketone) ( PPSK) with different molecular weight has been investigated both in nitrogen and air by DSC and TGA techniques.

用DSC和TGA研究了不同分子量PPSK的热转变行为及热分解动力学。

Effect of Penetration Enhancers on the Thermal Transition of Hydrated Callus Lipid in the Study of Differential Scanning Calorimetry

促渗剂对水合胼胝类脂热转变影响的差示扫描热分析研究

The relationship of B's thermal degradation and glass transition temperature with the percent of azide substitution is studied.

研究了不同叠氮取代率的叠氮聚醚多元醇的热分解行为和玻璃化温度，发现叠氮聚醚多元醇热分解分两步进行：第一步为255.06′C时，叠氮基团分解；

Thermal transition behavior of high molecular weight polyphenylene sulfide

高分子量聚苯硫醚的热转变行为研究

Test method for thermal transition temperature of textile material

纺织材料的热转变温度试验方法

Near the transition temperature, a thermal hysteresis was found in dielectric, pyroelectric and piezoelectric measurements.

在相变温度区域里, 介电 、 热电和压电都有明显的热滞效应,具有一级相变特性.

The effect of skin Penetration enhancers ( such as 1,8-cineole, Azone, propylene glycol and their mixtures) on the thermal transition of the lipid was assessed.

研究了1，8－桉油精，月桂氮酮和丙二醇等促渗剂对水合胼胝类脂热转变特征的影响。

This paper reviewed the properties, energy storage mechanism and relative merits of various kinds of polymer solid-solid phase transition materials for thermal energy storage, introduced their diverse applications and envisioned the development prospect of the materials.

综述了各类高分子固-固相变储能材料的性能、储能机理及其优缺点，介绍了此类材料的各种应用，并对其发展前景做了探讨和展望。